What You Need
- A Taratxt Gateway Device (prebuilt or DIY)
- Registered SIM card with SMS capability (inserted into the device)
- Power source (USB Type-C charger or power bank)
- Device Key and Token from the Taratxt Dashboard
Quick Start Video
[Video Placeholder]
Step-by-Step Setup
1. Insert the SIM Card
Insert your registered SIM card into the GSM module slot. Ensure the SIM has load and is unlocked.
2. Power On the Device
- Connect your device to power via USB Type-C
- Wait for the device to boot (approx. 10–15 seconds)
3. Connect to the Captive Portal
- Connect to the device hotspot
- If the portal doesn’t open automatically, visit
http://192.168.4.1
4. Configure the Gateway
- Enter WiFi credentials (SSID and Password)
- Enter Device Key and Token
- Click Save & Connect
5. Confirm Connection
- Log in to taratxt.com/app and check Devices
- The device should appear as Online
Troubleshooting
- Verify WiFi credentials, SIM load, and signal
- Power cycle the device and retry
- Reset the device and reconfigure if needed
You're Done!
Your Taratxt Gateway is ready to send and receive SMS.
💡 Tip: To test incoming webhooks, use SnapWebhook to instantly view and debug webhook payloads.